UPVC Door Lock Replacement
UPVC doors are a fantastic security measure against burglaries. However, they do have limitations that can be fixed by installing deadlocks.
It's time to replace the barrel lock if you feel that your uPVC door lock feels a bit loose. This easy DIY project will increase the security of your home as well as improve its appearance.
Removal of the old lock cylinder
If you're experiencing that your front door is flimsy when you lock it or that the key is struggling to turn, you could have a damaged lock cylinder. It will increase security and ensure smooth operation by replacing it. The process is fairly easy and should take about 30 minutes. You'll require a screwdriver. Open your door and look at the edge of the door close to the lock the cylinder. There is an screw that is aligned with the bottom part of the cylinder. Remove it using an screwdriver, and then put it away in a safe location.
You'll have to know the dimensions of the cylinder you have in place so you can locate a suitable replacement. Typically, the sizes range from 60mm to 110mm. To determine the size of the lock, you'll need to remove the screw from the faceplate. You can also turn the handle of the lock while the cylinder remains in place to gauge the amount it is moving.
Next, you'll need to measure the cylinder diameter and cylinder cam length. These measurements are essential for making sure that the lock you choose will be able to fit into the door. The dimensions of the lock can differ based on the type of uPVC. You'll need to choose an alternative that is similar or slightly bigger than the cylinder that is currently in use.
After you have the measurements, it is time to remove the old door cylinder. This is a fairly easy job, but it's essential to do it right to avoid damaging the door frame or door. Make sure that the door is propped up or secured so it does not close between steps.
If you don't want to tackle it yourself, hiring a professional locksmith is a great alternative. They can provide expert advice, flawless execution, and peace of mind. They can also assist you to choose a secure and safe locking system. However, DIY has its perks, including saving cash and gaining new techniques. You just need patience and the right tools like a Phillips Screwdriver. It's not as difficult as you think to change your uPVC locks.
Installing the new lock cylinder
When you are replacing the lock on your front door, it is important to use the right measurements and follow the proper steps to make sure that the new lock is put in the right way. This will not only prevent any future problems, but also make your home more secure and allow you use a key from both sides of the front door. Before you replace your uPVC lock, you should take measurements of the overall length and of the backset and the cylinder's diameter. These measurements will ensure that the lock cylinder can fit inside the uPVC and work effectively without gaps.
The first step in the process is to take off the door handle by loosening the screws holding it using the screwdriver. Next, you need to locate the screw that holds the cylinder lock in place and then remove it. After that, you can remove the old lock cylinder by inserting a key in the cylinder and turning it to both the left and the right. It is possible to remove the cylinder if the key is in one of these positions.
Installing the new cylinder into the front door is relatively simple and requires the same steps that you took to remove the old one. Be aware that the new cylinder will not fit in the space created by the old cylinder. This is due to the fact that the cylinder has to be aligned properly to allow it to be locked and closed with the key. You should make sure that the cylinder is centered and has a circular keyway.
Installing a new uPVC lock on your front door is not difficult, but you must be careful not to harm the handles or the door frames. If you aren't sure whether you're able to complete this task, consider hiring an expert who is a Checkatrade-approved locksmith and has experience working with the various types of doors. A locksmith will save your time and money by finishing the job quickly and efficiently.
Reattaching the door handle
There are several reasons you might want to upgrade the lock on your front door. You might have lost your key, your previous tenant hasn't returned your keys or you'd like to upgrade to more secure locks. Changing the lock barrel on the uPVC door is an easy task that can be accomplished in just five minutes. You'll need an Phillips head screwdriver, a new lock cylinder and an extra key for the barrel (if you're going to use one). Make sure the door is propped up or secured so that it does not close during the process.
There can be a few snags to changing the uPVC front door lock mechanism, but they're not as difficult to resolve as you might think. Start by identifying what type of lock is installed on your front door, then determine the size that you'll need to replace. replace door lock have single euro-cylinder locks. However, there are also strip locks and multipoint locks that are available for older doors. Once you know the brand and model of lock on your uPVC front door, it's much easier to locate a similar replacement.
After replacing the cylinder you must reconnect the handle. The first step is to loosen the set screw that holds the handle's spindle shaft with either a screwdriver, or Allen key. This will permit you to take the handle off and expose the shaft of the spindle. If the shaft is threaded, you'll need to loosen it up a bit and back it up using a screwdriver to ensure that it is properly fitted.
Test the lock after you have tightened the screws and the lock cylinder. Verify that the key is turning easily and is well-fitted, and the locking mechanism of the handle is operating correctly. Locksmiths can assist you if you're not comfortable doing it yourself.
It's also worth remembering that uPVC door handles and lock mechanisms require regular oiling to keep their functions. This is especially relevant in areas with high wear and tear like those that are frequently used or locked and shut. A little bit of lubricant can go in a great way to ensure that they function properly and extend their lifespan.
Test the new lock
A Upvc lock is a crucial element of the security of your home. Like all other devices, a uPVC lock can wear out or become compromised over time. The key to a functioning uPVC lock is regular maintenance. This will prevent problems from happening and could compromise your home's security. The best method to do this is to grease the internal mechanisms using an approved oil every six months. This will keep the lock functioning smoothly and will prevent it from rusting and becoming damaged.
You can use a silicon spray in addition to the standard oil to loosen the keyway. This will make it easier to insert the keys. This is a straightforward DIY solution that could save you money in the long run. You should avoid using WD-40 because it could leave a oily residue that could harm the lock.
It is crucial to test the new cylinder following installation before you can be sure that it will function properly. You can test this by testing the handle from the inside and outside of the door. You can now put the handles back into place and then re-insert the spindle screws if everything is in order. Finally, re-insert the screws that secured them and pat yourself on the back for a job well done!
A locksmith can also install additional features to increase the security of your home, such as door chains or sash jammers. They can also help you select the right locks for your home. A professional can also help you determine the right size cylinder for your doors, which is vital because a poorly-matched lock could compromise your security.
The cost of replacing the uPVC door lock can differ according to the kind of lock you select and the number of doors in need of replacement. The average cost for professional locksmiths will range from PS75-PS100 per hour, but this price will vary depending on your location and the type of lock you require. It is also important to compare locksmith prices before deciding on a company.